Linksys re6300 Setup

A Step-by-Step Guide to Linksys Extender Setup RE6300 AC750

Looking for the complete Linksys Extender Setup RE6300 AC750 steps? If a big yes, then look no further than our post. Here, all your top queries related to Linksys RE6300 setup answered. Read on.

Let’s first have a brief introduction to Linksys RE6300 AC750 WiFi range extender. Wait no more and continue reading this post.

What Linksys RE6300 Extender is?

Linksys RE6300 AC750 WiFi range extender is renowned for its functionality in dual bands (2.4 GHz and 5 GHz) as well as its two operating modes i.e. Range Extender Mode and Access Point Mode.

These two specific features stand out the RE6300 extender from others.

Obviously, Linksys AC750 RE6300 extender has not only these two features. Under the hood, the extender includes various amazing features:

  • Boosts the existing WiFi range up to 6500 sq. ft.
  • Comes with one fast Ethernet port which gives you the ability to create a wired connection between the extender and a wired device.
  • Utilizes Spot Finder Technology. It helps you to select the best place for your WiFi range extender.
  • Includes two external antennas to focus your WiFi signal in one specific direction.
  • Has WiFi Protected Setup (WPS) button for easy setup.
  • Compatible with all 802.11 a/b/g/n devices.
  • Provides support for web browser setup.
  • Embedded with cross-band technology which helps you in improving its performance in an effective manner.

And much, much more!

So this was all about its superb features. Now, let’s proceed further with the Linksys extender setup RE6300. In case, you would rather go ahead with the easy approach to set up the device, it is recommended that you walk through the instructions given in the user manual.

Read Also: Guide to Update Firmware on Netgear R7000 Router

Linksys RE6300 Extender

How to Set up Linksys AC750 RE6300 WiFi Range Extender?

As stated in the above section, Linksys RE6300 extender can be installed with browser-based setup. With this setup method, there is no need for an installation CD. You just have to go through the steps mentioned underneath:

Step1: At first, you need a device with which you can access the default browser-based utility for Linksys extender RE6300 setup. Now, connect this device with your Linksys AC750 RE6300 WiFi range extender.

However, make sure that your extender is turned on properly.

Step2: As soon as your device gets connected with the extender’s network, load up an internet browser. Google Chrome, Mozilla Firefox, Internet Explorer, Microsoft Edge, Apple Safari – you can use any browser you like.

Step3: Next, input http://extender.linksys.com web address in the URL bar at the top-left side. Press Enter key. This will take you to the Linksys RE6300 setup page.

Step4: On this page, you need to click on the Start Setup page.

Step5: After that, you will be asked the mode in which you want to set up your Linksys range extender. Choose either the range extender mode or access point mode.

Step6: A list of the available WiFi networks will appear on the screen. Select your WiFi network from this list. Make sure that you are properly locating the name of your network. Accessing a wrong network will only cause trouble for you, nothing else.

Step7: You will now be prompted to enter the password of your wireless network. Once done, hit next.

Step8: Given that the connection with your WiFi network has made successfully, a new page will open where you can configure your extended WiFi network.

Step 9: After making the required changes, click on the next button.

Step10: In case you have selected the range extender mode in the step 5, then you will get the Spot Finder Technology page. It will help you find the optimal place for your Linksys RE6300 extender.

Voila! Your Linksys RE6300 AC750 WiFi range extender has been set up properly. Ensure to create a strong admin password to protect your network from unauthorized access. We hope that all the aforementioned steps are clear and understandable to you. If you ever plan to bring a new router home and set it up via http //myrouter.local, refer to the user manual for the instructions needed to execute the process. Starting from the setup process to the reset process, you will find everything in the user manual of your networking device.

Here is the another guide: How to Do Linksys WiFi Extender Login and Setup?