Are you facing issues staying connected to WiFi after resetting Netgear Nighthawk R7000P router? If yes, then you are not alone in this battle. This issue can easily resolved by following a few hacks highlighted below.
In this article, we have summed up one of the best hacks that will help you get rid of WiFi connectivity issues after resetting Netgear Nighthawk R7000P router on the fly. So, without much delay, let’s get started, shall we?
Fix: Can’t Connect to WiFi
Check Your WiFi
This is the very first yet important fix to troubleshoot the issue. Make sure that your WiFi is on. Chances someone in your home accidentally turned off your WiFi and you getting the issue. So, check whether the device you are trying to access WiFi connected to your Nighthawk R7000P router or not. To verify, access the Netgear Nighthawk R7000P setup page. If you are having trouble accessing the setup page, it means that you still not connected to WiFi. So, without much delay, connect your devices to the Nighthawk router using a wireless source. An Ethernet source can also be used for the same.
Check the Connections
Loose or improper wired or wireless connections can also lead you to experience WiFi connectivity issues. To ensure the proper functioning of your Nighthawk router and to make the most out of your WiFi connection, check the Ethernet connection you have made between your devices. Apart from this, we also suggest you have a look at the Ethernet cable. Please make sure that there are no cuts or damages on it.
If you have used a wireless source for the same, ensure that you connected to the correct network. Moreover, there shouldn’t be any interference from third-party WiFi networks. To prevent this, we suggest you place your Nighthawk router at the center-most and higher area in your home.
Restart Your Modem and Router
If the issue still persists even after applying the hacks listed above, then we suggest you restart your modem and Nighthawk router once. To do so:
- Unplug your modem first.
- After a few minutes, unplug your Nighthawk router.
- Wait for some time.
- Plug in your modem.
- A few moments later, plug in your router as well.
- Wait for the power LED in your device to start blinking green.
Here’s to hope that this hack has helped you to fix the issue? No? Try the next hack outlined underneath.
Contact Your ISP
It is quite possible that your ISP is the culprit behind the issue and you are blaming your router for the same. To fix the issue on the go, contact your service provider. Ensure that everything is fine from his end. On the off chance your internet plans need to be upgraded, ask him to do the same for you as soon as possible.
Once the WiFi-related issue gets fixed from your ISP end, check your WiFi connection by accessing the Netgear Nighthawk R7000P setup page. Is the WiFi working fine now?
Still No Luck?
Check the Router’s Configuration
This is one of the most important steps towards fixing the “can’t connect to WiFi after resetting Netgear R7000P router” issue. First of all, ensure that you have performed and completed the Netgear router setup process in a proper way. An incomplete or partial Netgear router setup process leads to resetting.
The second thing you must ensure is that you have reset your Netgear router properly. Bear in mind – improper resetting of the Netgear router can lead you to experience many big issues.
Note: The resetting process required only if you have not properly performed the Netgear router setup process or have lost or forgotten the router login credentials. Apart from this, the Netgear router reset process also helpful to get rid of firmware-updated failed issues.
The third thing that you have to ensure is that after resetting, you have reconfigured the Netgear R7000P router in a successful manner.
We have given you a handful of hacks that can solve the “can’t connect to WiFi after resetting Netgear R7000P router” issue in the blink of an eye. Try them and help yourself to get back online in a jiffy. So, can we expect that the hacks were helpful? Did they help you to get rid of WiFi-connectivity issues?