Performing Netgear Orbi firmware update ensures that your Orbi device works properly. It also fixes bugs and errors. However, at times, users fail to execute this process successfully. If are also not able to achieve Orbi firmware update success, then it is recommended that you take a walk through the hacks given in this post. They will surely help you out to fix the issue at hand. Thus, wait no more and get down to reading.
[Fixed] Netgear Orbi Firmware Update Failed
Before implementing any other hack, it is recommended that you give your Netgear Orbi router a restart. Perhaps, technical glitches have caused the Netgear Orbi firmware update failed issue. If restarting your device does not bear any fruit for you, continue reading.
- Download the Right Version
Most users who experience the Netgear Orbi firmware update failed issue face it because they make the mistake of downloading the wrong firmware version. Maybe, you also walked on the same path, unintentionally obviously.
Therefore, it is recommended that you download the firmware version which is compatible with your Orbi device. If you want to be sure about your router, refer to the user manual.
- Check the Cable Connection
You might have not used a damage-free Ethernet cable for building a stable connection between your Netgear Orbi router and the existing modem.
If you do not believe us, it is recommended that you check for the same. Is what we are saying true? Well then, you need to get a new cable to connect your devices. This time, make sure that it has no cuts on it and it shouldn’t be worn out.
In case none of these things work for you, take our advice and get your hands on a wireless source to connect your devices. Trust us, it will be worth it.
- Contact the ISP
Another reason why you are not able to perform Netgear Orbi firmware update with ease is because your internet connection is poor. And that might be because your Internet Service Provider is busy focusing on everything except his job. Thus, contact him right away.
Does he agree that a weak internet connection might be because of something that he did unintentionally? Yes? Well then, without being rude, ask him to troubleshoot the issue.
- Follow the Correct Instructions
Maybe you did everything right but followed the wrong instructions to update the firmware of your Netgear Orbi router. Therefore, it is recommended that you try to update your Orbi device again. But, this time, you need to do that by following the correct steps.
Here are the steps that will guide you:
- Plug your Orbi into a wall socket and hit the power button.
- Connect the Orbi router to the modem.
- Thereafter, switch on the satellite after plugging it into a socket.
- Open an internet browser on your laptop.
- Visit the orbilogin.net page.
- Once you have accessed the orbilogin page, enter the admin details.
- Hit Log In.
- Under the Administration, locate the Firmware Update option.
- Whenever you find it, click on it.
- Wait for some time.
Once the firmware of your Netgear Orbi router has been updated, your device will reboot on its own. So, do not interrupt the process by plugging out your device.
In Conclusion
Performing Netgear Orbi firmware update is important if you want your device to function well. However, if you fail during the process, then we are sure that going through the aforementioned hacks will be of some use to you.
What do you think about this article? Was it helpful? Reply in a YES or NO via the comment section. In this way, you will be able to share your feedback with your fellow readers.