The floor is very important in giving an attractive look to any property. So, it is important to maintain the floor. If you have a hardwood floor, then there is a need to maintain the floor with the process of sanding. Sanding and polishing the floor gives a unique look to the hardwood floor. If you also want to increase the value of your house. It will be helpful to do this process by suggesting vinyl floor polishing in Perth. You can also do the sanding and polishing process by yourself. But you must know all the processes and tips to do it accurately.
If you want to hire some professionals, they must know the important methods of sanding the floor. You should know about their experience and the tools used in this process. If you don’t want to hire them, it will be good to do it yourself. But when you can not do it before. It will be stressful because you don’t know what type of machines can be used for sanding.
By reading this article, you should know about different important methods that help to do the sanding by yourself.
Why is there a need to sand the hardwood floor?
It’s time to refinish the floor if there are water stains, scratches, dullness, or entire areas that have been worn bare by household traffic. In the past, doing so required sanding the wood down to its bare surface, employment, and dust-producing process that can be dangerous if you lack experience or pricey if you hire a professional.
While many floors can be reformed by sanding, some floors need this level of work. But by following the right method, you can easily do the sanding. But there is a need for tools and equipment to do the sanding process.
Clear all the area
In the first method, you must clear all the floor areas. If you can not remove all the things, it will be stressful for you to do the sanding properly. In this process, a lot of dust can be produced, so you have to cover all the furniture and things around you with sheets. Those people who are suffering from any respiratory problems such as asthma etc.
It is recommended that they can not do the sanding by themselves. It will be helpful for you to hire some professionals to do floor sanding in Perth for them. First and foremost, safety, so wearing old clothes or overalls is advised. You should also wear protective goggles and a dust mask to prevent dust in your eyes, nose, or mouth.
Know your floor type
Hardwood floors are also available in different types. So, before doing the vinyl floor polish. It is important to know the type of the floor. When you are ready to refinish a floor, ensure you know the type of wood you are working with. Refinishing real hardwoods like oak or maple is not too difficult. Pine floors are a little trickier to work with, but you can make a lovely floor with a little care. If your floor is too old and you can do the sanding on that floor so many times. It will be a waste of money to do the sanding process again.
So, another refinishing may not be possible for a very old, heavily refinished floor. If possible, lift a heating grate to check the amount of remaining hardwood. You cannot re-sand the floor if there is less than 1/8 inch above the tongue or if you can already see nail heads on the floor. Most vinyl floor polish in Perth can recommend trying to refinish the floor. Look into options for chemically removing the old finish. It
Remove all the nails and mould from the surface
Before doing the sanding, removing all the nails from the floor is important. Otherwise, you can get damage yourself as well as the floor. On the other hand, if you want the best results, a vinyl floor polish in Perth can give them. You should follow all the steps that can follow by the professional to do the sanding and polishing. Firstly, clean the floor with a clean cloth and cleaning products. Then do this process to get excellent results of sanding and polishing.
Use of types of equipment and its cost
If you can do the sanding yourself, it will be helpful to borrow the equipment and take it as rent. Because the floor sanding cost and buying this equipment can burden your budget, it will be helpful to rent the equipment.
Use of drum sander: The drum sander should be moved in the direction of the wood’s grain, not perpendicular to it, for the best results. Sanding can begin after the area has been made clear, the floor has been vacuumed, and a box fan has been added to an open window for ventilation. If you can hire an expert, the floor sanding Perth prices will be high, which will stress you.
Make at least two passes over the entire floor. When the sawdust bag swells or after each circuit of the room, empty it and carefully dispose of it in your garbage can.
Conclusion: Sanding is not a difficult process. But it will be dangerous for those suffering from asthma problems. There is a need to follow all the steps and use proper equipment.